![background image](http://html1.mh-extra.com/html/aaeon/mix-kluw1/mix-kluw1_manual_3306997036.webp)
3-8
MIX-KLUW1
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy
operating systems (OS).
[Disabled]
The USB devices can be used only for the BIOS setup
program.
[Auto]
Allows the system to detect the presence of USB
devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected,
the legacy USB support is disabled.
3.3.9
Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~Port4 [Output], DIO Port5~Port8 [Input]
Configuration options: [Input] [Output]
The following item appears only when you set
DIO Port1~8
to [Output].
Output Level [High]
Configuration options: [High] [Low]
3.3.10 Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
Restore AC Power Loss [Last State]
[Last State]
The system goes into either off or on state, whatever the system
state was.
[Always On]
The system goes into on state after an AC power loss.
[Always Off]
The system goes into off state after an AC power loss.
RTC Wake system from S5 [Disabled]
[Disabled]
Disables system wake up from S5.
[Fixed Time]
The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
[Dynamic Time]
The system will wake up at the current time plus a specified
number of minutes.
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.