background image

MIX-H310D2

2-16

2.7 Connectors

2.7.1 

Rear panel connectors

1

2

3

4

7

6

5

1. 

DC power connector.

 Insert the power adapter into this port.

2.

 

USB 2.0 ports.

 These four 4-pin Universal Serial Bus (USB) ports are 

available for connecting USB 2.0/1.1 devices.

3.

 

LAN (RJ-45) ports.

 These ports allow Gigabit connection to a Local Area 

Network (LAN) through a network hub. Refer to the table below for the LAN 

port LED indications.

 

LAN port LED indications

LAN port

Speed 

LED

Activity Link 

LED

4. 

Line Out port (lime). 

This port connects to a headphone or a speaker.

5. HDMI

TM

 ports. 

These ports are for High-Definition Multimedia Interface 

(HDMI

TM

) connectors, and are HDCP compliant allowing playback of HD 

DVD, Blu-ray, and other protected content.

6. 

USB 3.2 Gen 1 ports.

 These 9-pin Universal Serial Bus (USB) ports connect 

to USB 3.2 Gen 1 devices.

7. 

Microphone port (pink)

. This port connects to a microphone.

ACT/LINK LED

SPEED LED

Status

Description

Status

Description

Off

No link

Off

10 Mbps connection

Orange

Linked

Orange 100 Mbps connection

Orange 

(Blinking)

Data activity

Green

1 Gbps connection

Orange 

(Blinking 

then steady)

Ready to wake 

up from S5 

mode

_

_

Summary of Contents for MIX-H310D2















































Reviews: