Aaeon IMBM-Q170A, User Manual

Page: 42 / 50

3-12
IMBM-Q170A
3.3.9 Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DI0 Port1~DI0 Port4 [Output]
Configuration options: [Input] [Output]
The following item appears only when you set DI0 Port1/2/3/4 to [Output].
Output Level [High]
Configuration options: [High] [Low]
DI0 Port5~DI0 Port8 [Input]
Configuration options: [Input] [Output]
3.3.10 Power Management
Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
The following items appear when you set Power Mode to [ATX Type].
Power Saving (ERP) Control [Disabled]
This item configures power mode for power saving function.
Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Always Off]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.
RTC Wake system from S5 [Disabled]
[Disabled] Disables system wake up from S5.
[Fixed Time] The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
[Dynamic Time] The system will wake up at the current time plus a specified
number of minutes.
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
The following item appears when Wake System with Dynamic Time is enabled.