Aaeon IMBA-Q17A, Manual

Page: 26 / 44

IMBA-Q170A
2-18
CAUTION:
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
3. Chassis / CPU fan connectors (4-pin CHA_FAN1/2, 4-pin CPU_FAN1)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
4. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
IMPORTANT:
When using hot-plug and NCQ, set the SATA Mode Selection
item in the BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
IMBA-Q170A
IMBA-Q170A Fan connectors
CHA_FAN1
GND
VCC
SENSE
PWM
CHA_FAN2
A A
B
B
C
C
CPU_FAN1
GND VCC SENSE PWM
GND VCC SENSE PWM
PIN 1
PIN 1
PIN 1
IMBA-Q170A
SATA6G_3 SATA6G_4
SATA6G_1
GND
RSATA_TXP1 RSATA_TXN1
GND
RSATA_RXN1 RSATA_RXP1
GND
GND
RSATA_TXP3 RSATA_TXN3
GND
RSATA_RXN3 RSATA_RXP3
GND GND
RSATA_TXP4 RSATA_TXN4
GND
RSATA_RXN4 RSATA_RXP4
GND
SATA6G_2
GND
RSATA_TXP2 RSATA_TXN2
GND
RSATA_RXN2 RSATA_RXP2
GND
IMBA-Q170A Intel
®
SATA 6 Gb/s connectors