background image

3-8

EMB-Q87A

3.4 Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an 

item then press <Enter> to display the sub-menu.

3.4.1 

System Agent (SA) Configuration

VT-d [Enabled]

Allows you to enable or disable VT-d function on MCH. Configuration options: 

[Enabled] [Disabled]

PCIe x 16 port Speed [Auto]

Allows you to configure the PCIEx16 port speed.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]

Primary Display [Auto]

Allows you to select the graphics device for primary display. 
Configuration options: [Auto] [IGFX] [PEG]

Graphics Configuration

Internal Graphics [Auto]

Configures IGD enabled based on setup options. Configuration options: 

[Auto] [Disabled] [Enabled]

DVMT Pre-Allocated [32M]

Allows you to select the amount of system memory allocated to DVMT 5.0 

used by the Internal Graphics Device. Configuration options: [32M] [64M] 

[96M] [128M] ~ [416M] [448M] [480M] [512M] [1024M]

DVMT Total Gfx Mem [256M]

Allows you to select the total amount of system memory allocated to DVMT 

5.0 used by the Internal Graphics Device. Configuration options: [128M] 

[256M] [MAX]

LVDS Enable [Enabled]

Configuration options: [Disabled] [Enabled]

LVDS Panel Type [1024x768, 18bit, 60Hz]

Select the type of LCD panel used as display. Configuration options: 

[640x480, 18bit, 60Hz] [800x480, 18bit, 60Hz] [800x600, 18bit, 60Hz] 

[1024x600, 18bit, 60Hz] [1024x768, 18bit, 60Hz] [1024x768, 24bit, 60Hz] 

[1280x768, 24bit, 60Hz] [1280x1024, 48bit, 60Hz] [1366x768, 24bit, 60Hz]

[1440x900, 48bit, 60Hz] [1600x1200, 48bit, 60Hz] [1920x1080, 48bit, 60Hz]

[1920x1200, 48bit, 60Hz]

Summary of Contents for EMB-Q87A

















































Reviews: