manualshive.com logo in svg

Aaeon EMB-Q77A, Owner'S Manual

Share
Download
Aaeon EMB-Q77A Owner'S Manual Download Page 45

3-9

Chapter 3: BIOS setup

3.3.7 

USB Configuration

The items in this menu allow you to change the USB-related features.

The USB Devices item shows the auto-detected values. If no USB device is 

detected, the item shows 

None

.

Intel USB2.0 EHCI Controller [Enabled]

[Enabled] 

Enables USB2.0 EHCI Controller.

[Disabled] 

Disables USB2.0 EHCI Controller.

Legacy USB Support [Enabled]

[Enabled] 

Enables the support for USB devices on legacy 

operating systems (OS).

[Disabled] 

The USB devices can be used only for the BIOS setup 

program.

[Auto] 

Allows the system to detect the presence of USB 

devices at startup. If detected, the USB controller 

legacy mode is enabled. If no USB device is detected, 

the legacy USB support is disabled.

Legacy USB3.0 Support [Enabled]

[Enabled] 

Enables the support for USB 3.0 devices on legacy 

operating systems (OS).

[Disabled] 

Disables the function.

[Disabled] 

Disables the function.

Summary of Contents for EMB-Q77A































































Reviews:

No comments

Brands by name

Popular brands

Load more brands