EMB-H81B
2-20
8.
Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pins labeled “Intruder” are shorted with a jumper cap. Remove
the jumper caps only when you intend to use the chassis intrusion detection
feature.
9.
Digital I/0 connector (10-pin DIO)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
NOTE:
To configure the I/O pins in BIOS, go to the
Advanced
tab >
Dynamic
Digital IO
. See section
3.3.2 Dynamic Digital IO
for details.
EMB-H81B Chassis Intrusion connector
Intruder
Intruder
No Intruder
PIN1
CHASSIS
EMB-H81B Digital I/O connector
PIN 1
DIO
DIO_P#1 DIO_P#3 DIO_P#5 DIO_P#7
+5V
DIO_P#2 DIO_P#4 DIO_P#6 DIO_P#8 GND
Summary of Contents for EMB-H81B
