5. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~3)
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-BSW1
EMB-BSW1 SATA 6.0Gb/s connectors
SATA6G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA6G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
SATA6G_1
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
EMB-BSW1
EMB-BSW1 USB2.0 connectors
PIN 1
GND GND S_USB_PP S_5V
+5V
S_USB_PN S_USB_PP
GND GND
USB1112
PIN 1
GND GND S_USB_PP S_5V
+5V
S_USB_PN S_USB_PP
GND GND
PIN 1
GND GND S_USB_PP S_5V
+5V
S_USB_PN S_USB_PP
GND GND
USB910
USBHUB_12
A
A
B
B
6. USB 2.0 connectors (10-pin USBHUB_12, USB9~12)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
CAUTION!
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
NOTE:
The USB module cable is purchased separately.
2-13
Chapter 2: Motherboard information
