5. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
6. USB 2.0 connectors (10-pin USB2_56, HUB_USB2_P12, HUB_USB2_
P34)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
CAUTION!
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
NOTE:
The USB module cable is purchased separately.
EMB-APL3
EMB-APL3 SATA 6.0Gb/s connectors
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
EMB-APL3
EMB-APL3 USB2.0 connectors
PIN 1
GND GND USBPP2 5V
+5V
USBPN1 USBPP1
GND GND
PIN 1
GND GND USBPP4 5V
+5V
USBPN3 USBPP3
GND GND
HUB_USB2_P12
PIN 1
GND GND USBPP6 5V
+5V
USBPN5 USBPP5
GND GND
USB2_P56
HUB_USB2_P34
2-13
Chapter 2: Motherboard information
