R e m o t e T o u c h D i s p l a y
A C D - 5 1 5 R
Chapter 2 Hardware Installation
2-6
ACD-515R-A2 (One-to-one Network)
SW1 SW2
Short Press
Link on: Link (Default)
Link off: Unlink
Video Mode* (Default)
Graphic Mode*
Long press on Reset
(Press until Red LED
blinking)
Engineering Mode*
N/A
Long Press on Reset
(Press until both
Red LED and
Green LED Blinking)
Engineering
Mode* and
Reset to default*
N/A
*1: Graphic mode:
The system will get better performance of graphic/text in the screen. But it
would occupy larger bandwidth of the network.
*2: Video mode:
The system will adjust automatically between Ethernet bandwidth and
video quality. It would occupy smaller bandwidth of the network.
*3: Engineering mode:
(1)Static IP: 192.168.0.88
(2)User can connect to http://192.168.0.88 webpage for firmware
update.
(3) Firmware update file name will be: webfwc.bin
*4: Engineering mode:
(1) Reset Any change in SPI flash setup flag.
(2) Re-generate Random MAC to avoid any possible MAC collision.
After Reset to Default and reboot cycle, a new random MAC will be
generated.
*5: Update EDID:
The feature is used for one-to-multiple Mode to select which monitor/TV
EDID is used for system wide EDID usage. During one-to-multiple setup,
there may be monitor/TV that has lower resolution. For example, 1
monitor/TV with 720p resolution with mostly 1080p solutions. Please select
the monitor/TV with lowest resolution, to ensure all can be displayed
correctly. For customers who are using 1 pair of Host/Client with
one-to-multiple mode, the end user has to update EDID correctly. If not, it