®
Aluminum Athletic Equipment
1000 Enterprise Drive, Royersford, PA 19468
Toll Free: (800) 523-5471 Fax: (610) 825-2378
www.AAEsports.com
View from field of Play
Crimped
Cable End
(pre-assembled)
Cable Clamp
Loop must be on
cut end of cable
Support
Cable vinyl
jacket must
be stripped
from cable
loop end
Support Cable
vinyl jacket
After cable has been
fully tensioned trim
back cut end and
wrap with tape
Installation Notes:
Refer to collar assembly diagram for
1.
further detail on collar and cable
assembly.
Install Crimped Cable End to Right End
2.
Post collar
using an anchor shackle.
Route cable to Left End Post. Snap cable
3.
into Pear Clips of the Inner Posts along
the way
Before assembling Clamped Cable Loop
4.
End, fully open the turnbuckle.
With anchor shackle and thimble inplace
5.
run cable thru the shackle as shown. Pull
slack out of cable and mark vinyl sleeve
approximately 4" from thimble end. Strip
vinyl from mark location towards cable
loop end.
With the slack still being pulled out of
6.
cable install and secure the cable clamps.
The first clamp should butt upto the
thimble, the second should be spaced
approx. 1" on center from the first. Cable
clamps must be gripping bare cable to
ensure proper seating/grip.
Left End Post
(Clamped Loop End)
Right End Post
(Crimped Loop End)
Clamped Loop End
Detail
Thimble
(must be present)
FBS-35
Assembly Instruction
Lower Horizontal
Support Cable
10
of 1
1
