AAD CUBII, Owner'S Manual

Page: 6 / 10

5
FRONT PANEL DESCRIPTION
1. INSTRUMENT INPUT JACK CHANNEL A
This is a combo socket accepts both standard ¼ inch mono jack and XLR plug.
2. INPUT GAIN SWITCH CHANNEL A
High: Higher sensitivity, high impedance input for passive guitar with magnetic pickups
Low: Lower sensitivity input setting for guitars/basses with onboard electronics.
MIC: Switch to this when plugging in a microphone. This input is for dynamic low impedance
balanced line microphones. If you need to use a condenser microphone that requires phantom
power, you will need an optional phantom power unit.
3. CLIP INDICATOR
When the amplifier output is clipping, the LED will light up with red.
4. INPUT LEVEL SENSITIVITY CHANNEL A
5. BASS EQ CONTROL
6. MID RANGE EQ CONTROL
7. TREBLE EQ CONTROL
8. FX SEND
Connect the FX send to auxiliary FX unit input.
9. FX BLEND SWITCH
This switch select signal from channel A or channel B or both to the FX SEND output.
10. FX Return
Connect the FX Return to auxiliary FX unit output.
11. HEADPHONE OUTPUT JACK
This jack accepts ¼ inch stereo headphone jacks.
12. POWER LED INDICATOR
With power switched on the LED light will turn bright blue.
13. INSTRUMENT INPUT JACK CHANNEL B
This is a standard ¼ inch mono jack socket.
14. CLIP/ MUTE INDICATOR
When the amplifier output is clipping, the LED will light up with red. When muted, the LED
will light up with green.