Installation Diagram
I
NSTRUCTION MANUAL
AAPRODUCTSINC
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
Attach two top clamps to each carrier hood using the M6*75 bolts and nuts. Place a screw nut into the indent on one side of the
top clamp. Fit the bolt into the other side of the top clamp, threading it through the clamp and the carrier hood until it meets the
nut. Tighten securely with the wrench.
Use
This roof ski carrier is designed for carrying skis and snowboards only. Two skis/snowboards may be stacked with the bottoms
touching. The higher front end of the skis should be facing the back of the vehicle for improve aerodynamics. See Fig1
7RVHFXUHWKHVNLVLQSODFHͤUPO\FORVHWKHWRSRIWKHFDUULHUKRRGXQWLOLWODWFKHVLQSODFH/RFNFORVHG6RPHVNLVPD\UHTXLUH
that you hold down the top of the carrier hood and lock in place in order to stay securely closed. Never drive without both carriers
locked closed. See Fig 2
Attach the bottom clamps to the top clamps using the m6*65 bolts and nuts. The vehicle crossbar should be between the top
FODPSDQGERWWRPFODPSEHIRUHVHFXULQJWRͤ[WKHVNLFDUULHUWRWKHYHKLFOHURRI3ODFHDQXWLQWRWKHLQGHQWVLQWKHXQGHUVLGHRIWKH
bottom clamp. Fit the bolt into the holes in the top clamp and bottom clamp, meeting the nut. Tighten securely with the wrench.
F
IG 1
Top Clamp
M6*75 Hex Cap Bolt
&
M6 Hex Nut
Bottom Clamp
M6*65 Hex Cap Bolt
&
M6 Hex Nut
F
IG 2
