•
Ensure the solar array does not exceed the maximum input voltage.
•
Repair and clean as necessary.
Installation
&
System
Connections:
•
Connections should be made according to Article 690 of the National Electrical Code (NFPA
70) or the standards in force at the installation location.
•
Electrical connections may be made in any order; however the sequence below is
recommended.
Mounting
mount the controller near your battery securely using the holes provided on the enclosure’s
flanges or with a means appropriate to the application.
• mount near battery.
• the GVB can be mounted in any orientation.
• do not expose to water (Please see model GVB-WP For Waterproof Version).
• do not mount in direct sunlight or near a source of heat.
• allow adequate airflow around the controller to achieve maximum output capability.
• For outdoor use, the controller must be housed in an enclosure providing
protection at least equivalent to nema type 3.
Note:
do not install this controller in a Golf Cart. We offers the GVB-WP for Golf Carts
and other applications where water resistance is needed.
Note:
make sure to inspect the controller at least once per year to ensure proper
performance. Please see the Inspection & maintenance section in this guide.
