AA Portable Power Corp
www.batteryspace.com
, Email: [email protected]
AA Portable Power Corp.
www.batteryspace.com
AA Portable Power Corp.
www.batteryspace.com
1)
Product description:
a)
This charger is designed to charge Li-Ion/polymer rechargeable battery pack with a
capacity > 1500mAh.
b)
Charger (Male) Options Include:
i)
5.5mm x 2.1 mm Barrel Alligator clips for battery packs with open wire ends.
ii)
Car charger male end.
2)
Features:
a)
Worldwide input AC power: 100-240V
b)
Constant current charging shortens charging period
c)
Over Voltage Protection: The output current is limited when an overload (12.6V/0.8A)
is detected.
d)
Output Reverse Protection: The charger will be cut off when the battery polarity is
wrongly placed.
e) Short
Circuit
Protection1
f)
Red LED shows a state of charging and green LED shows a state of fully charged.
3)
Operations:
a)
Put battery in a fireproofing container, and charge it in an isolated area. Keep it away
from any flammable materials.
b)
Battery needs to be cooled down to ambient temperature before charging.
c)
Do not charge battery packs in series. Please charge battery pack individually.
Failure to do so may result in misrecognition of the battery and improper charging
functions. This may lead to overcharging, and cause a fire.
d)
Be sure to select the cell count and voltage that shows on the label of the battery to
be charged. Wrong selection could cause a fire.
e)
Do not charge any battery pack with an open voltage of 3.3V per cell.
f)
Select a charging rate that is less than the capacity of the battery to be charged.
4)
Technical Specification:
Input: AC 100-240 V, 47-63 Hz
Output : DC12.6V
Charging Current: 1500 mA
Operating Temperature: 32-113 F
Suit Battery: 11.1V Li-ion/polymer battery with capacity > 1500mAh
5)
Notice:
a)
Use with proper type Li-Ion/polymer battery pack only. Please make sure the battery
voltage matches what labels on the charger (11.1V). The battery will be damaged or it
will not be charged if they do not match.
b)
Never charge other types of batteries besides Li-Ion/Polymer.
c)
Always place the charger in well-ventilated, dry environment.
d)
Indoor used only, never expose the charger to water such as rain and splash.
e)
Never place the charger near radiator, heat register or similar heat source when in
charging.
f)
Do not use this charger if any of the following happens:
i)
If the power cord or plug is damaged or frayed
ii)
If liquid has been spilled into the charger
iii)
If the case of the charger is dropped and damaged
