— 5 —
1. Press [Shift + Alt + F11] or [Shift + Alt + F12] to call up the RF-Mouse ID Code window.
2. Move the RF-Mouse for a few seconds to establish a connection, then click
Connect ID
.
3. The new ID code is Connected and the RF-Mouse window closes.
4. Click Exit to close the RF-Mouse ID code window.
Identifying Components
The mouse is designed to fit snugly into your hand. The scroll wheel is positioned on the top allowing
for easy operation with the index finger. Standard mouse buttons are positioned to either side of the
scroll wheels and can be reached comfortably with the index and ring fingers. A third button is placed
under the vertical wheel and can be easily clicked by pushing down on the wheel.
The following pages will tell you how to configure the scroll wheels and buttons to suit your specific
needs.
Cleaning the Mouse
Clean the mouse regularly to ensure efficient operation. Refer to the following:
1.
Rotate the housing cover counterclockwise until it un locks and remove it.
2.
Remove the tracking ball.
3.
Wash the tracking ball with warm water and soap then allow it to dry.
4.
Use a cotton swab and alcohol to clean the tracking rollers in the housing.
5.
Replace the tracking ball and the housing cover.
6.
Rotate the housing cover clockwise until it locks in place.
