14
www.a4.fr
ASSEMBLY GUIDE
Stage Activity
100
140
150
120
130
Motor unit assembly
Plan: gear motor assembly plan on page 04.
Parts: PropulsO set, 2 screws TC Ø 3 x 6.5 mm, motor, steel axle Ø 3 x L 60 mm.
Tools: Phillips screwdriver, cutter plier.
Control : function test with a power supply (battery) 1.5 to 3 V.
Aluminium wire and plate assembly
Plan : assembly plan of aluminium wire and plates on page 11.
Part : spacer plate, cell support plate, aluminium wire Ø 3 x L 110 mm,
2 countersunk head screws Ø 2.2 x L 4.5 mm.
Tools : Phillips screwdriver
Control : one can bend the aluminium wire without it moving (rotating)
in the plates.
Fixing the spacer plate onto the motor unit
Parts : 2 cap screws Ø 3 x 6.5 mm, motor unit, aluminium wire and assembled plates
Toolsl : Phillips screwdriver.
Control : good support : no gap in the assembly.
Fixing the motor unit on the chassis
Parts : motor unit, 4 cap screws Ø 3 x 6.5 mm, chassis.
Tools : Phillips screwdriver.
Control : good support : no gap in the assembly.
Fixing the double-sided tape onto the cell support plate
Parts: cell support plate and double-sided adhesive pellets.
Control: positioning ; the double-sides pellets must not exceed the plate sides.
Student Worksheet
– Using the parts supplied in kit K-SLD
