9
English
IP address settings (continued)
Setting new static IP address in
the ESX-200
Connect your PC to each EXM
unit after that you have done all
other settings in the units and
change to a specific IP address
for every unit.
A recommendation is to use from
192.168.0.21 and higher.
NOTE!
Almost every switch/router use
192.168.0.1 as default IP address so
make sure you don’t use the same IP
address in any ESX-200 unit.
To continue installation press [Input]
4. Settings (continued)
4.3.3 Input settings
Select the modulation type you
want to receive. If you choose
DVB-S2 you also can select
between QPSK, 8PSK or 16 QAM.
Choose fixed or universal LNB.
Set the Polarisation. Voltage, FEC
and 22 kHz tone you normally set
to “Auto” if you have connect the
ESX-200 to an Universal LNB or a
switch with same functionality as a
Universal LNB.
Note!
Inverted spectrum is
sometimes used in C-band
transmissions and is set
automatically by auto detection.
