13
The module (EFTA1-T2 or ETA-100) can be installed either stand alone forming a
complete channel or it can be installed in a base unit (EBU-100) together with any of
our high quality VSB RF-modulators.
Before connecting power to the module, make sure that all other connections are
made. If a stereo RF-modulator such as the EVA-210 is available, connect Right and
Left audio outputs to the corresponding inputs on the EVA-210. Connect also the
video source (CVBS) to the video input of a modulator (EVA-200/210). Use a coaxial
cable of good quality with a male F-connector for connection to the Antenna input of
the ETA-100 or EFTA1-T2.
Connect power supply and make all necessary settings as described in section 4 and 5.
6. Installation
EPP-100 Power supply
100W 11 outputs
ESP-100 Power supply
15W 1 output
EBU-100 Base unit for
10 modules and power supply
Wall mount plate
DC-cable for EPP-100
English
Installation on wall as a stand alone unit with single power
supply (ESP-100) and a wall mount plate.
Accessories
Installation in a base unit with 10 modules
and common power supply.