99
English
5.2 Input settings
As the MyM-3S contains 2 separate
tuners, start by selecting either
[Tuner 1]
or
[Tuner 2]
. Select the modulation type
you want to receive. By selecting DVB-S2
you also can select between QPSK, 8PSK
or 16 QAM.
Set the Polarisation. Voltage, FEC and 22
kHz tone should normally be set to “Auto”
if you have connected the MyM-3S to a
Universal LNB or a switch with same
functionality as a Universal LNB.
Note!
Inverted spectrum is sometimes
used in C-band transmissions and is set
automatically by auto detection.
Finally enter the correct Symbol rate and press
[Set]
and then enter the Transponder frequency
and press
[Set]
. The available services will now be presented in the
[Service Management]
menu. We suggest that you consult:
http://en.kingofsat.net/
or another web site for correct
parameters for the services you intend to use.
The input level should be higher than -65 dBm, preferably more than -50 dBm and max -25 dBm
and C/N should read more than 10 dB.
5 Menus and settings (continued)
Summary of Contents for MyM-3S Micro Master
Page 1: ...1 1 MyM 3S Micro Master Installation Guide design for TV English ...
Page 18: ...18 Notes ...
Page 19: ...19 Notes ...
