A2A Simulations BONANZA ACCU-SIM V35B, Manual

Page: 104 / 112

106
A2A SIMULATIONS ::: ACCU-SIM V35B BONANZA www.a2asimulations.com
FOR SIMULATION USE ONLY
T
he 2D panels are there to provide the extra functionality
needed when there is so much additional information avail-
able to you, the pilot.
Each 2D panel is accessed by the key-press combination
in parentheses after the 2D panel title. If the default com-
mands listed commands don’t work please check the mappings in your
host simulator under ‘Panel Window 1 to 9’
Pilot’s Notes (Shift 2)
• Outside Temp: is the ambient temperature outside the aircraft.
• Watch Engine Temps: this warning will display if your engine
temperature is nearing danger limits. Corrective action should
be carried out immediately if this warning appears.
• Cabin Temperature: displays how comfort-
able the temperature of the cabin feels.
• Ground Speed: this is your speed in rela-
tion to the ground in miles/hour and knots.
• Endurance: this figure tells you approximately how long you could
remain in powered flight before running out of fuel. This figure
will update throughout your flight, and as such you should take
into account that during a climb phase, the endurance will be
less than once the aircraft is settled in a cruise configuration.
• Range: given in statute (sm) and nautical miles (nm), this
figure will give you an approximation of your maximum range
under current fuel consumption and airspeed conditions. Again,
this figure will change depending on your flight phase.
• Fuel Economy: is the current fuel burn rate given in gallons/hour
(gph), miles/gallon (mpg) and nautical miles/gallon (nmpg).
• Power Settings: this represents your clipboard, show-
ing you important information for the correct set-
tings for takeoff, climb and cruise configurations.
• Notes: these are a set of pages (accessed by the small arrow to the
right of the page number) that include information such as actions
to be carried out when first entering the cabin, to landing checks.
2D PANELS