A1 Touch AOD 150, User Manual

Page: 11 / 14

Page 11
2.4
Option: 10 pts Projected-capacitive-touchscreen
Projected capacitive sensor
Float laminated glass, glare is standard, tempered is option.
Glass Glass with black borders on back surface.
Chemical resistance Acetone, ammonia-based glass cleaners, hexane, isopropyl
alcohol, methylene chloride, mineral spirits, turpentine, methyl
ethyl ketone, gasoline, kerosene, vinegar.
Contact bounce Around 5 ms for finger contact
Activation force
No activation force needed
Input modus Finger, glove hand (rubber, cloth, leather)
Surface hardness Mohs’ hardness rating: 7
Resolution 2048x2048
Position accuracy (linearity) less then 1%
Operating life
∞
Light transmission 90% ±2%
Projected capacitive controller USB is standard, RS232 (option)
Power consumption controller
50mA typical,50mV peak to peak maximum ripple and noise
Interface USB: 1,1 Full Speed ('plug-and-play' compatible is standard)
Operating Temperature -25 to 80°C
Relative Humidity 95% at 60°C, RH Non-condensing
Resolution 2048x2048
Report rate
USB: Single touch Max. 200 points/sec
10 pts touch Max.points/sec each
Response time Max. 20ms
Support operating system
( eGAlax_eMPIA-controller) Microsoft Windows: ME/2000,9x/XP/Vista/7/8/10
CE 2.12/3.0/.net/5.0/6.0 ; Embedded ; XP Tablet PC edition
Mac OS9, Mac OS X,(IBM, Intel CPU)
Linux: Red Hat (7.3/8.0/9.0), Mandrake (9.1/9.1/10) SuSE
(9.2,9.3,10,10.1) Fedora (Core I ,II ,III,IV,V,VI)
Yellow (Dog 3.x), Debian (Kernel 2.4.X/2.6.X), Ubuntu (5.1,6.06),
Mandriva (2005,2006)
Android 2.0 – Google , Moblin V2 - Intel
QNX: RTOS v6.3
2.5
OPTION: IR TOUCH
Chemical resistance Acetone, ammonia-based glass cleaners, isopropyl
alcohol, turpentine, methy alcohol, methyl ethyl ketone,
toluene, gasoline, kerosine, vinegar
Touch activation force no minimum touch activation is required
Input modus everything bigger than 6,5 (W) x 6,5 (H)
Life performance
∞
Supply voltage +5V DC(±5%)
Supply current ~ 150mA
Interface standard RS232 baud rate: 9600, 8 data bits, 1 stop bit, no parity, full duplex
Electrostatic discharge protection prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV contact
discharges)
Touchpoint density Based on controller resolution, up to 4096x4096
Light transmission Over 90% (per ASTM1003)
Conversion time less than20 ms
Support operating
system
Microsoft Windows: NT4.0/XP/Vista/7/2000/ME/98/95
Linux: Red Hat 9.0, Mandrake 9.1
Interface
USB (standard) RS232 with PS/2