― 17 ―
WARNING
●
To avoid electric shock hazard, make sure to set the function selector
switch to "OFF" and remove the test leads from the instrument before
trying to replace batteries.
CAUTION
●
Do not mix new and old batteries.
●
Make sure to install batteries in correct polarity as indicated in the
battery compartment.
NOTE
●
If the instrument is powered on, but the display blanks or "BATT" is
shown on the display, replace the batteries.
①
Set the function selector switch to the "OFF" position.
②
Unscrew and remove the battery compartment on the bottom of the
instrument.
③
Replace the batteries observing correct polarity. Use two new R6P
batteries.
④
Replace and screw the battery compartment cover.
8.Battery Replacement
Screw
Battery
Battery
compartment
cover