background image

 

 

-Page  5 – 

© A.W. Communication Systems Limited 2004

 

 

 

Status Information 

 
Status information forms part of the selective calling system. The status of a mobile is 
indicated by appending one or more numbers to the mobile’s call- sign. In a similar 
way, a control room operative can send a status code to a mobile to command a 
required readiness state. 
 

 

Alpha Tags 

 
Alpha tags are text names, which can be allocated to individual identities, status 
codes, and channels. These tags are intended to make the system readily 
understandable by translating the numbers used within the system into text. By way of 
example the incoming code 12349 can be tagged to display “Dog Van 3 Meal Break” 

 
 
Headset Working 

 
In busy control rooms it may be desirable to achieve quiet operation of the radio 
system, and this can be achieved by plugging in an operator headset and microphone 
combination. Once the operator is using the headset, then operation of the keypad 
Transmit key will cause the operator’s voice to be transmitted. In receive mode, the 
operator can choose to use the internal loudspeaker, or turn the loudspeaker off by 
pressing the [

LS

] key. 

 
 

Common Headset Working 

 
If the operator is equipped with a headset, then the DRC-32 can also be 
interconnected to the telephone system. This interconnection will have been 
undertaken by your system supplier. By interconnecting the DRC-32 to the telephone 
system, the operator can use the same headset to make and receive telephone and 
radio calls. It is also possible to connect a mobile radio conversation directly to the 
telephone system – see teleconnect. 
 
 

Menu System 

 
The menu system provides the operator access to many of the system facilities. The 
menu is accessed by pressing the menu key and then using the up and down scroll 
keys to move through the menu options. These are described in greater detail later. 
 
 

Talk Through 

 
Talk through is the term used for a facility which permits one mobile to speak with 
another. It would be normal practise for the mobile requiring the talk through facility 
to ask control to enable the facility. The DRC-32 can command talk through in several 

Summary of Contents for DRC-32























Reviews: