
6240V Mainboard Chapter 1 Introduction
3
CHAPTER 1 SYSTEM FEATURES
1-1 Introduction
6240V mainboard is designed to run with VIA
Apollo 133 (693A + 596B)
or VIA
Apollo Pro+ (693 + 596A) chipset to enhance the performance and extraordinary
value of the Intel
Pentium
II/III
and
Celeron
processor-powered PC.
It is mounted
with Slot 1 supporting 66MHz, 100MHz and 133MHz(optional for Apollo Pro133
chipset) Front Side Bus CPU. To enhance its memory and peripheral support, 4
DIMM sockets and 5 PCI slots are mounted on board. In addition, 1 AGP and 2 ISA
slots can satisfy some exceptional users’ requirements.
1-2 System Specifications
:
CPU Slot supporting Intel Pentium
III CPU 450Mhz to 733MHz, Pentium
II CPU
233MHz to 450MHz and Intel Celeron
CPU 266MHz to 466MHz.
(133MHz
Host Bus CPUs are supported while using VIA 693A chip)
:
VIA Apollo Pro 133 (693A + 596B) or VIA Apollo Pro+ (693 + 596A) chipset.
:
Four 168-pin DIMM sockets in four banks of 64-bit wide path up to 1.0GB (for
VIA 693 chip) or 1.5GB (for VIA 693A chip) unbuffered SDRAM (with parity
chip ECC support).
:
Built-in Switching Voltage Regulator.
:
One AGP slot, two 16-bit ISA slots and five PCI slots compliance with reversion
2.2 of the PCI Local Bus specification.
:
Dual Master IDE connectors supporting Ultra DMA/66 (66MB/sec), up to four
devices in two channels for connecting of high capacity hard disk, CD-ROM,
LS-120MB floppy drive, tape backup etc.
( Ultra DMA 66 is not supported while
utilizing VIA 596A chip.)
:
Software Power Off Control; Modem Ring On; SB-Link; Keyboard & PS/2 Mouse
Power On; Wake-On-LAN functions.
:
Winbond 83977 high-speed Ultra Multi-I/O chipset.
:
USB (Universal Serial Bus) Connector supporting up to 127 peripheral devices.
:
PS/2 Keyboard Connector and PS/2 Mouse Connector.
:
Infrared Transfer (IrDA TX/RX) Connector.
:
One FDD Port supporting two devices available for 1.2MB, 1.44MB and 2.88MB.
:
Two 16550A fast UARTs compatible Serial Ports.
:
One EPP/ECP mode Parallel Printer Port.
:
ATX Power Connector.
:
ATX Form Factor; Hardware Dimension is 305mm x 190mm. (12" x 7.48")