a-them AVM 90, Operating Manual

Page: 40 / 68

5.5 INPUT SETUP
In this menu, you con fi gure inputs and listening mode presets. The unit comes programmed from the factory with six
(6) inputs, but you may change this to create up to 30 inputs. MRX/AVM uses virtual inputs that give you complete
control of the name of each input you create, along with which video (HDMI) input to use, which audio input (HDMI,
digital, analog, bluetooth or streaming) to use, which speaker pro
fi le to use, and much more. You can even create
multiple inputs for the same source device. For example, a Blu-ray input con fi gured for 7.1.4-channels and another
Blu-ray input using the same player con fi gured for 2-channels (and no subwoofer).
Input Setup
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
eARX
Streaming
HDMI 1
Bluetooth
Input Count 6
Insert Input
Delete Input
To add a new input at the end of the list, highlight “Insert Input” and press SELECT.
To delete an input, highlight “Delete Input”, press “SELECT”, highlight the input you want to delete and press
“SELECT” again.
The following settings display for each con fi guration:
Input Setup
Input Name HDMI 1
Video Input HDMI 1
Audio Input HDMI
Convert Analog N/A
Speaker Pro fi le Pro fi le 1
Anthem Room Correction N/A
Dolby Volume O ff
Dolby Volume Leveler N/A
Mode Preset for Mono Sources Last Used
Mode Preset for Stereo Sources Last Used
Mode Preset for Multi-Ch Sources Last Used
Lip Sync 0 ms
Input Trim 0.0 dB