a-them AVM 90, Operating Manual

Page: 56 / 68

7.5 BASS / TREBLE / BALANCE
To change the tone of your system, press BASS or TREBLE on the remote control then the up/down buttons. Note that
BASS does not a
ff ect the subwoofer output, which is handled by the Level adjustment.
To change balance, press BAL on the remote. Then, press up to move the image to the right or down to move the
image to the left.
7.6 LIP-SYNC
If the audio is not synchronized with the video, press LIP-SYNC then up/down to add as much as 500 milliseconds of
delay. Adjusting the lip-sync permanently changes the lip-sync setting of the current input.
7.7 LISTENING MODES
Refer to the Input Setup section for a description of listening modes. Once the MRX/ AVM’s display shows the input
format, the listening mode preset is applied. If you wish, you can make a di
ff erent selection after pressing the MODE
button.
At times it might appear that the MRX/AVM is detecting a sound format di ff erent from the one that you would like to
be playing. Note that the source is in control and that the connection to the MRX/AVM carries one format at a time. To
ensure audio sent to the MRX/AVM is in its original format:
In the source’s setup menu, set digital audio output to Bitstream mode for all Dolby Digital and DTS formats.
If the source is a Blu-ray player, also ensure that Secondary Audio is disabled.
If the source material is on Blu-ray or DVD, you may want to select an audio track other than the disc’s default.
There are two ways to do this: through the audio or language setup in the disc’s menu, or during the movie by
pressing AUDIO on the player’s remote control. 1.
2.
3.