28
*
Flow rate depends on variable factors such as feed water pressure, feed water
characteristics and condition of the membranes and filters.
**
Recovery and TDS reduction percentages also depend on variable factors such as life and
condition of the membranes and filters, feed water pressure, feed water characteristics.
***
If input pressure exceeds 30 psi, a pressure reducing valve needs to be installed at the
feed line. If the pressure is lower than 7 psi, a booster pump needs to be installed.
Ensure you buy them from A. O. Smith Company authorised service technician
Technical Specifications
Model
A. O. Smith & RO
Product Dimensions (H x D x W)
482 mm x 369 mm x 326 mm
Net weight
10.8 kgs (approx.)
Gross weight
15.2 kgs (approx.)
Flow rate*
Up to 15 litres per hour
Storage tank capacity
9.2 litres (approx.)
Storage tank capacity (Hot tank)
0.8 litres (approx.)
Purification technology
RO (Reverse Osmosis) + Silver Charged
Membrane Technology
7 Stage Purifying Technology
Pre- Sediment Pre Carbon
Side Stream RO me
MIN-TECH + Silver Activated Post Carbon
and SCMT filter
Membrane type
Thin film composite RO membrane
Material of construction for plastic
Food safe, non-toxic, engineering grade
parts plastics
Pump type
Diaphragm pump, 24VDC, 0.26 Amps,
Operating Pressure 125 psi (Max.)
Input voltage
150 – 300 VAC, 50 Hz
Power rating (Max.)
60 Watts
Pressure Rating***
7 psi to 30 psi
% Recovery**
Up to 30%
TDS reduction**
≥95% (approx.)
Heating element wattage
500 Watts @ 230 VAC
Warm water temperature
45°C ± 5°C
Hot water temperature
80°C ± 5°C
Emergency cutout temperature
90°C ± 3 °C
Input water temperature
5°C to 45°C
Summary of Contents for Z6
Page 2: ......
