A.O. Smith waterclinic LOTUS 75 M, User Manual

Page: 13 / 60

ENG 11
Functions of the Main Components
The standard configuration of the water purifier that utilizes the current,
most advanced international RO technology is as follows:
• The first stage is a 5-micron PP filter (Sediment):
The pores on the aperture within the PP filter is 5 microns wide so it
can effectively filter rust, sand, other larger particles and solid impurities
suspended in the water.
• The second stage is a granular activated carbon filter:
The filter effectively absorbs chlorine, mould, disinfection by-products,
odors, discolorations and other materials suspended in the water.
• The third stage is a Composite Filter (Sediment&Carbon Block):
This filter further removes small particles, suspended solids, colloids,
and reduces residual chlorine, disinfection byproducts, bad taste and
odor.
• The fourth stage is the RO membrane:
The membrane has an aperture of 0.0001 micron (0.1 nm) that reduces
bacteria by 4,000 fold, reduces viruses by over 200 fold, so you can
effectively remove bacteria, viruses, heavy metals, pesticide residue,
and other harmful substances contained in your water supply.
• The fifth-stage is a post-activated carbon filter:
This filter regulates the taste of water and keeps the water fresh.
Note: the parameters above may change due to product improvements, but the product name plate shall remain the same. TDS refers to influent total dissolved solids.
Note:
0.1 MPa = 1.02 Kg/cm 2 = 14.5Psi
1 Psi = 0.07 Kg/cm 2
1 Gallon = 3.785 Liters
75 GPD = 75 Gallons/Day = 284 Liters/Day = 197 Milliliters/Minute
Technical Specifications
Model No.
Voltage
Total Power
Type
230 V AC 50 Hz
13 W 36 W
Lotus 75 M
Mechanic
Lotus 75 TC
Digital
Suitable Water Pressure
Operating Pressure
Inlet Temperature
Maximum Daily Water TDS Value
Flushing Method
Electric Shock Protection Type
Dimensions
Weight
Suitable Water Quality
Maximum Daily Water Production Volume
Tank Volume
0.1-0.35 MPa (1 Bar to 3,5 Bars)
0.6-0.8 MPa (6 Bar to 8 Bars)
5 ~38˚C
≤1000 PPM
75 Gallons, approximately 284 Liters
2.5 Gallons, approximately 9.5 Liters
Class II
Municipal water meeting TS 266
270x410x420 mm
10.5 kg
N/A Auto Flushing