T-M50 / T-M50 ASME Service Manual
Ver. 1.05
70
CONFIDENTIAL
12-16. Alarm port terminal
This function is to alert end-users of any error codes that may occur by using an alarm lamp and/or the
buzzer and connecting it to the central computer board.
When the left/right computer(s) and/or the central computer board detect any error codes, the alarm
port terminal on the central computer board will turn ON, activating the connected lamp or buzzer.
<
How to reset the operation>
Turn off the remote controller and/or the T-M50.
(Diagram)
The current of electricity
Maximum is 0.5 A
Lamp/Buzzer
120 VAC Relay
(Not included)
(Not included)
Alarm port terminal
120VAC
Refer to Section 12-18 for more information about relay selection
