8
Clock setting
Long press the key“
” to enter clock setting state
under non-timing state, the hour digit will flash;
press the key “ ” or “
”to set the hour with a range
of “0-23”, then press the key “
”, the minute digit
will flash; press the key “ ” or “
”to set the minute
with a range of “0-59”. If the key is hold, the data
will change consecutively, then press the key“
”,
the clock setting will be completed and exit the clock
setting state.
Figure 9
Clock view
:
Under the startup state, press the key “
” once to
display the time (Figure 9) for 16 seconds and then to
return to original state.
Long press the key“ ” to enter clock setting state under non-timing state, the hour digit will flash; press
the key “ ” or “
”to set the hour with a range of “0-23”, then press the key “
”, the minute digit will
flash; press the key “ ” or “
”to set the minute with a range of “0-59”. If the key is hold, the data will
change consecutively, then press the key“ ”, the clock setting will be completed and exit the clock
setting state.
Clock view
: under the startup state, press the key “
” once to display the time (Figure 9) for 16 seconds
and then to return to original state.
Timer Setting
With the indicator TIMER 1 lighted up, long press and hold “ ” button to enter TIMER1 starting time
setting state. “TIMER 1” “ON”, hour and minute digits will flash at the same time. Press “
” or “
” to
increase or decrease the hour by 1 and the minute by 30.If the key “ ” or “
” is hold, the set digit will
change consecutively. After finishing the start time setting, press “ ” button to enter TIMER 1 ending
time setting state. “TIMER 1” “OFF”, hour and minute digits will flash at the same time. The stop time
setting is same as above. Press“ ” button to confirm the “TIMER 1” setting. (Figure 10, 11)
When the indicator light “TIMER 2” is on: the setting method is same as above.
With indicator of both Timer-1 and Timer-2 light up, water heater will work in both periods.
Figure 10
Figure 11
Figure 12
PROGRAM
INSTANT
MODE
PUMP
1
PROGRAM
INSTANT
MODE
PUMP
1
PROGRAM
INSTANT
MODE
PUMP
SETTING
PROGRAM
INSTANT
MODE
PUMP
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
PROGRA
The heating timer interval can be set based on the personal water consumption need, i.e. the point to start or
stop of the water heater.
