background image

6

User Manual Epsilon-Series

The Epsilon boiler is a room sealed, condensing 

and modulating central heating boiler.

The boiler is provided with a compact stainless 

steel heat exchanger with smooth tubes. A well 

thought out principal using durable materials.

The boiler burns gas for supplying warmth. The 

heat is transferred in the heat exchanger to the wa-

ter in the central heating system. By cooling down 

the flue gasses condensate is formed. This results 

in high efficiency. The condensate, which has no 

effect on the heat exchanger and the function of 

the boiler, is drained through an internal siphon.

The boiler is provided with an intelligent control 

system (CMS Control Management System). The 

boiler anticipates the heat demand of the central 

heating system or the hot water facility. 

When an outside sensor is connected to the boiler, 

the boiler works weather dependantly. This means 

that the boiler control measures the outside tem-

perature and flow temperature. With this data the 

boiler calculates the optimal flow temperature for 

the installation.

The efficiency of the boiler is very high and the 

radiation convection and standby losses very low. 

The emission of noxious substances is far below 

the fixed standards.

On the left side of the boiler there is a small door. 

Through  the  transparent  part  you  can  see  the 

boiler  status  on  the  display.  After  opening  this 

door you will find the function keys. On the right 

side of the door you will find an instruction card in 

a sleeve with an  explanation of the display mes-

sages and function keys. This is also described in 

the following pages.

Description of the boiler

Room sealed boiler

The boiler retreives its com-

bustion  air  from  outside 

then  discharges  the  flue 

gasses to the outside.

Condensing

Retrieves heat from 

the flue gasses. Water  

condensates on the heat 

exchanger.

Modulating

Higher or lower burning 

according to the heat 

demand.

Stainless steel

Super  solid  kind  of  steel 

which keeps its quality for 

life. It will not rust or erode 

in  contrast  to  composition 

materials, like aluminium.

Summary of Contents for Epsilon EB-40

















Reviews: