background image

2

safe InstallatIon, use, and serVIce

the proper installation, use and servicing of this water heater is extremely important to your safety and the safety of others.

Many safety-related messages and instructions have been provided in this manual and on your own water heater to warn you and 

others of a potential injury hazard.  read and obey all safety messages and instructions throughout this manual.  It is very important 

that the meaning of each safety message is understood by you and others who install, use, or service this water heater.

 

this is the safety alert symbol.  It is used to alert you 

to potential personal injury hazards.  obey all safety 

messages  that  follow  this  symbol  to  avoid  possible 

injury or death.

all safety messages will generally tell you about the type of hazard, what can happen if you do not follow the safety message, and 

how to avoid the risk of injury.

IMportant defInItIons

•  

  Qualified Installer or Service Agency:

  Installation and service of this water heater requires ability equivalent to that of a Qualified Agency (as defined by ANSI below) in the field 

involved. Installation skills such as plumbing, air supply, venting, gas supply, electrical supply are required in addition to electrical testing 
skills when performing service.

•  

  ANSI Z223.1 2006 Sec. 3.3.83:

 

  “Qualified Agency” - “Any individual, firm, corporation or company that either in person or through a representative is engaged in and is 

responsible for (a) the installation, testing or replacement of gas piping or (b) the connection, installation, testing, repair or servicing of 

appliances and equipment; that is experienced in such work; that is familiar with all precautions required; and that has complied with all 

the requirements of the authority having jurisdiction.”

  danGer 

  warnInG 

  cautIon  

danGer indicates an imminently hazardous 

situation which, if not avoided, could result 

in death or injury.

warnInG indicates a potentially hazardous 

situation which, if not avoided, could result 

in death or injury.

cautIon  indicates a potentially hazardous 

situation which, if not avoided, may result 

in minor or moderate injury.

cautIon  used  without  the  safety  alert 

symbol indicates a potentially hazardous 

situation which, if not avoided, could result 

in property damage.

cautIon

Summary of Contents for DVE-150, DHE-200





















Reviews: