A.O. Smith DURA-Power DRE-52 Installation And User Instructions Manual Download Page 2

2

Read this manual carefully

Warning

Read this manual carefully before using the device. Not reading this manual and not 

following the instructions in this manual may lead to personal injuries and damage to the 

device.

Copyright © 2009 A.O. Smith Water Products Company

All rights reserved.

Nothing from this edition may be copied, reproduced and/or made public by means of 

press, photocopying or in any other way without the prior written permission of A.O. Smith 

Water Products Company.

A.O. Smith Water Products Company reserves the right to change the specifications as 

mentioned in this manual.

Trademarks

All brand names mentioned in this manual are registered trademarks of the respective 

suppliers.

Liability

A.O. Smith Water Products Company does not accept any liability for claims of third parties 

as a result of incompetent use other than mentioned in this manual and in conformity with the 

General Terms and Conditions as filed with the Chamber of Commerce.

For further information see the General Terms and Conditions. These can be obtained 

from us free of charge.

Although utmost care has been taken in ensuring a correct and, where necessary, 

complete description of the relevant parts, the manual may contain errors and some things 

may be unclear.

Should you still discover faults or things which are unclear, please inform us about this. It 

helps us to further improve the documentation.

Additional information

If you have any remarks or questions concerning specific subjects related to the device, 

please do not hesitate to contact:

A.O. Smith Water Products Company

P.O. Box 70

5500 AB Veldhoven

The Netherlands

Telephone: (free)  0870 - AOSMITH

 

 

0870 - 267 64 84

General:   

+31 40 294 25 00

Fax: 

 

+31 40 294 25 39

E-Mail:   

[email protected]

Website:   

www.aosmithinternational.com

For problems with respect to connections to electricity and water supplies, please contact 

the supplier/installation engineer of your installation.

Note: “A.O.Smith Water Heaters” is tradingname of Advance Services (Sales) Ltd.Reg.

Summary of Contents for DURA-Power DRE-52



























Reviews: