NEED HELP? GIVE US A CALL
877.333.7108
1
2
Attach each sump to bottom of unit
housing. Align connection points,
push sump up and turn to the right.
Note: Ensure all sumps are attached
and locked in place. Ensure the
sumps are not on an angle while
attaching. This may result in damage
to the o-ring. Do not lubricate the
o-ring.
1. Connect tubing from brass tee into
inlet side of filter unit.
2. Connect tubing from faucet into
outlet side of filter unit.
Note: Use diagram to check tubing depth.
It is VERY IMPORTANT to insert tubing
completely (0.95") to prevent leaking.
INSTALLATION GUIDE
4
1
2
1
2
3
Depth to insert 2 stage tubing
Diagram is actual size.
Tips
•
Insert tubing completely (0.95") to
prevent leaking.
•
Wet end of tubing for easy installation
into inlets and outlets.
•
Cut excess tubing to prevent crimping,
kinks, loops or folds.
WARNING
Do not use tools
to remove or tighten sumps.
Over-tightening can cause
damage and result in leaking.
HAND TIGHTEN ONLY.
STEP 4
Install Filter Sumps
STEP 5
Connect Supply Lines