A.O. Smith AH - 290, Installation, User And Service Manual

Page: 45 / 122

2.4 Transport
When carefully transporting the heat pump over short distances, it can be
tilted up to 45°C. If this limit is exceeded, the heat pump must stand in its
normal upright position for at least 1 hour before it may be started.
Transport and storage may take place at temperatures between -10 and
+50 °C.
The heat pumps top / casing is not suitable for lifting with and must be
carefully avoided during transport.
2.4.1 Transport with forklift
For transport with a forklift, the heat pump must stand on the associated
transport frame. Always lift it slowly. Due to the high position of the centre
of gravity, the heat pump must be secured against tipping during
transportation.
2.4.2 Unloading the heat pump
In order to avoid damages, the heat pump must be unloaded on a flat sur -
face.
2.4.3 Transport with trolley
The heat pump may only be transported on an associated transport
frame.
The heat pump must be secured against sliding on the trolley.
Water connections, etc., may not be used for transportation purposes.
Make sure that the trolley does not damage the cabinet and the
connections.
45