510
Indoor / 510 Outdoor Service Manual
Ver. 1.00
55
CONFIDENTIAL
12-6. Assigning unit numbers in the Easy-link system
A.
How to display the unit number
Press the “Increase” button on the computer board. The 7-seg LED will then display the assigned
number for that 510 Indoor or 510 Outdoor unit for 10 sec.
NOTE: In a single-unit installation, the numbering system is disabled.
B. How to reset and reconfigure the numbering of units
Unit #’s can be reset and reassigned manually:
1. Press and hold the “Increase” button on the computer board of all child units for at least 5
seconds.
2. The 7-seg LED on the computer board of all child units will display “0” to signify that the computer
memory has been erased of its previously assigned unit #.
3. Press and hold the "Increase" button on each unit in the new order of your choosing. The new
unit numbers will be assigned in this order.
Each 510 Indoor or 510 Outdoor in an Easy-link system is assigned a random
unit #, except for the
Parent unit, which is always assigned as unit #1.
When more than four units of the 510 Indoor or 510 Outdoor are
connected in an Easy-link system, only the first four units will work as a
system. The remaining units will not operate.
7-seg LED
“Increase” button
Computer board
