WE STRIVE FOR PERFECT BUT KNOW IT’S NOT ALWAYS POSSIBLE.
WE NEVER LEAVE A RIDER BEHIND. CALL 228.901.8386 OR EMAIL [email protected]
22
23
13
14
Loosen the handlebar
adjustment bolt using
the 6MM Allen Key
to change the angle
of the handlebars to
your liking. Typically,
riders prefer their grips
parallel to the ground.
Locate the Front
Reflector [how do
they know it’s the
front?]. Rotate the
reflector so that it
points forward.
Adjust the position of
the front reflector and
tighten the screw on
the bracket with the
Phillips Screwdriver.
ADJUSTMENT BOLT
6MM
ALLEN KE Y
PHILLIPS
SCREWDRIVER
6MM
ALLEN KE Y
15
16
Locate your Seat (the
seat tube is attached).
Open the seat post
clamp. Holding the
seat post firmly, insert
into the seat post tube
until the top is level
with your waist.
Close the seat post
clamp lever.
Loosen seat clamp
using a 6mm Allen
key and rotate the
top clamp 90º. Place
the saddle and rotate
the top clamp to it’s
original position.
Center the seat and
keep it parallel to the
ground. Tighten with
Allen key.
Make sure not to drop the
seat post into the frame.
NOTE
