EDID FUNCTION
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION
Button. The LCM will be show
LEARNING
.
Switcher will
LEARN
destination HDMI EDID and pass the selected source.
Learning EDID setup for CATx
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
Press
EDID > DESTINATION > DESTINATION >
SOURCE > ENTER
Switcher will
LEARN
destination CATx EDID and pass the selected source.
Learning EDID setup for CATx
Key Press Sequence:
EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER
Again, Press the same DESTINATION # to learn CATx EDID The EDID for
CATx has been learned
NOTE :
The already learned EDID cannot be modi
fi
ed. You can only rebuild a new Learning EDID.
For example:
When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the EDID data
cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when you want to
remove the learning EDID memory from EPROM.
18
