A-Neuvideo HD-44AK Instruction Manual Download Page 4 | Manualshive

Page: 4 / 24

A-Neuvideo HD-44AK Instruction Manual Download Page 4

2

FEATURES

FEATURES

•

(8) HDMI with Auxiliary Audio (Analog Audio) source devices matrix switched to (8) HDMI with S/PDIF output destinations

•

HDMI digital Video w/embedded HDCP, DVI format and CEC/HDCP 2.0 compliant

•

Worldwide control EDID modes for HDMI full 4K2K (24/30 Hz) HD Video resolutions

•

Link speeds of up to 6.75 Gbps (link clock rate of 340MbHz), Support HDMI 4K2K, 1.4a 3D formats

•

Wide range of HD resolutions from PC xGA to WUxGA 1920x1200 and HDTV/DTV HDMI resolutions 480i/480p, 576i/576p, 720p,
1080i/p & 4K2K (24/30Hz).

• Compatible with all HDMI source devices, PC monitors, Plasma HD display, HDTV and audio receivers or audio amplifiers
•

Digital Video TMDS formats Resolution up to 4K2K with Deep color 36-bit

• Digital Audio Support :

• Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2

•  Audio Input : Support Auxiliary Audio (Analog stereo audio)
•  Audio Output : Support Digital audio ARC or Digital audio S/PDIF ( from HDMI source or Auxiliary Audio)
•  Various User Interface Control:

• Windows based GUI control via RS-232 port
• Front Panel push button
• IR wireless remote control
• Ethernet Switch control
• Third party RS-232 controller (via simple ASCII)

•

Using the build-in booster, each HDMI Output port is capable of driving cable lengths 1080p up to 98 ft (30M) & 4K2K up to 66 ft (20M)

• The HD-88AK HDMI Outputs contain a booster enabling longer cable runs without using amplifier/repeaters. HDMI specification is 15M

or 50 feet. The HD-88AK is capable of supporting 30M or 98 feet.

• Support world wide (10) control function keys:

• Full function front panel controls: ARC / AUX/ ALL / OFF / EDID / LOCK / RECALL / MEMORY / ENTER

• Support EDID Modes :

• Embedded EDID modes: FSS/ H24-3D/ H24-3D-M/ H36-3D/ H36-3D-M/ 4K2K-3D / DVI-D 1920x1200-60Hz
• External modes: Learning mode. Automatic scanning input & output status via LED show on front panel

•

Automatic scanning input & output status via LCM show on front panel

•

Support IR Remote and IR Extender with distance up to ~ 984 feet (300M) Maximum

•

Support Universal power adaptor AC90V~AC240V, 50/60Hz

The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last configuration will be invoked.

A

NEU

VIDEO

«
...
2
3
4
5
6
...
»

Summary of Contents for HD-44AK

























Reviews:

No comments