A-Neuvideo ANI-MOD88 Instruction Manual Download Page 4

2

INTRODUCTION & FEATURES

INTRODUCTION

A-Neuvideo’s ANI-MOD series is a high-performance video and audio modular matrix switcher supporting up to 64 input and 64 
output signal sources. It supports different video signals with cross switching. Every video or audio signal is transmitted and switched 
independently to decrease signal attenuation (does not support A/V breakaway). ANI-MOD supports various changeable cards including 
HMDI, DVI, VGA, SDI and HDBaseT™ etc, and all the cards support hot plug & play. Users can choose to insert different signal cards 
for different applications.

The ANI-MODs have a power fail memory, where upon power restoration, the last matrix configuration will be restored. It has RS-232 port 

for serial control and optional IP port for TCP/IP control, can be easily controlled by third-part devices.

With its flexible design, ANI-MOD can be used for different project and tend to be an all-in-one solution. It is the combo solution for 

multimedia conference rooms, control rooms, broadcasting rooms, shopping center etc. It will handle all the audiovisual management, 
including the switching, driving, scaling etc.

ANI-MOD Modular Matrix Switcher Models

Models

Height

Maximum Slot

Power supplies RS-232 control

Audio I/O

Network control

ANI-MOD88

2U

2 input card slots & 

2 output card slots

Single

ü

Yes*

Optional

ANI-MOD1616

3U

4 input card slots & 

4 output card slots

Dual

ü

No

Optional

ANI-MOD3232

5U

8 input card slots & 

8 output card slots

Dual

ü

No

Optional

ANI-MOD6464

10U

16 input card slots & 

16 output card slots

Dual

ü

No

Optional

*The ANI-MOD88 is unique in this series in that it comes with (8) analog audio Inputs and (8) analog audio Outputs already installed. 
These audio I/O’s are independent of any other cards installed. You cannot do Audio/Video breakaway and they cannot be routed 
independently from other channels.  For example, when you route HDMI Input 2 to HDMI Output 3, the analog audio Input 2 will also route 
to analog audio Output 3. This card is not available as a separate card for installation into the other chassis. 

On 

ALL 

models (including ANI-MOD88) cards that have external audio I/O, you can select between the different audio Input sources.  For 

example, the HDBaseT™ Input card has HDMI with embedded audio, and a 3.5mm analog stereo audio port.  Using RS-232 commands, 
you can select the audio source as embedded or external.  On the Output card, the embedded and external audio will be the same. You 
cannot do Audio/Video breakaway.

FEATURES

•  Modular chassis with configurable I/O slots, ranging from 4x4 to 64x64
• 

Various I/O cards, includes HDMI, HDBaseT™, SD/HD/3G-SDI, DVI and VGA cards (Compatible with YUV, YC, CVBS & CVBC) to 

configure any matrix

• 

Truly cross-point switching, any input to any output, regardless of signal format

• 

Supports HDMI1.4a, supports 3D & HDCP compliant

• 

Integrated HDBaseT™ technology

• 

Controllable via front panel push buttons, RS-232 & optional TCP/IP, also compatible with 3rd party controlers

• 

LCD display

A

  

NEU

VIDEO

Summary of Contents for ANI-MOD88

































Reviews: