4
OPERATION CONTROLS AND FUNCTIONS
Transmitter
q
INPUT LED:
Input status indicating lamp. This red LED illuminates when the HDMI signal is plugged in.
w
HDMI IN:
HDMI input port. This slot is where you connect the HDMI source.
e
ETHERNET:
This slot provides internet signal from the receiver or to the receiver.
r
RS-232:
Phoenix jack provides Serial port control from the receiver or to the receiver.
t
DC IN:
Plug the 24V DC power supply into the unit.
y
IR RX:
Chanel 1 IR Receiver. Connects with the Wideband IR Rx.
u
IR TX:
Chanel 2 IR Transmitter. Connects with the Wideband IR Tx.
i
LINK LED:
Connection status indicating lamp.
•
Illuminated:
The Transmitter and Receiver have good connections.
•
Flashing:
The Transmitter and Receiver have poor connections.
•
Dark:
The Transmitter and Receiver are not connected.
o
HDBaseT
™
OUT:
HDBaseT
™
signal output port. Connects the HDBaseT
™
receiver with a UTP cable following IEEE-568A or IEEE-
568B standards.
a
DATA LED:
Data status indicating lamp.
•
Illuminated:
The HDMI signal has HDCP.
•
Flashing:
The HDMI signal is without HDCP.
•
Dark:
No HDMI signal.
A
NEU
VIDEO
