3
Function Description
Transmitter Introduction
q
IR:
IR receiver.
w
ON/LINK/IN LED Indicators:
All are green LED.
ON:
Working status indicator of this device. When the device works fine, the LED will keep blinking. And it will get off when
the device
stops work.
LINK:
Twisted Pair Link status indicator. It will keep on when connection is successful.
IN:
When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, the LED will blink.
e
POWER LED:
LED indicator of power. When connect with power, red LED will keep on.
r
TP OUT:
Single TP cable connects to TP IN port in ANI-402R.
t
HDMI IN:
Connect to HDMI source.
y
IR IN:
Connect with IR receiver, the IR signal received from this port can only send out in ANI-402R.
NOTICE: When there is IR receiver connected to this port, the port (1) will be unavailable.
u
IR OUT:
Connect with IR sender, the sending IR signal are received from ANI-402R.
i
RS-232:
RS-232 connector.
o
5V DC:
Connect with power supply.
RECEIVER Introduction
q
IR:
IR receiver.
w
ON/LINK/IN LED Indicators:
All are green LED.
ON:
Working status indicator of this device. When the device works fine, the LED will keep blinking. And it will get off when the device
stops work.
LINK:
Twisted Pair Link status indicator. It will keep on when connection is successful.
IN:
When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, the LED will blink.
e
POWER LED:
LED indicator of power. When connect with power, red LED will keep on.
r
TP IN:
Single TP cable connects to TP OUT port in ANI-402T
t
HDMI OUT:
Connect to HDMI display, HDMI signal output.
y
IR IN:
Connect with IR receiver, the IR signal received from this port can only send out in ANI-402T.
NOTICE: When there is IR receiver connected to this port, the port (1) will be unavailable.
u
IR OUT:
Connect with IR sender, the sending IR signal are received from ANI-402R.
i
RS-232:
RS-232 connector.
o
5V DC:
Connect with power supply.
A
NEU
VIDEO
