OPERATION CONTROLS AND FUNCTIONS
CONTINUED
TOP PANEL
Note: Please remove the protective plastic fi lm from the top panel before using the touch key function.
POWER:
Press this button to turn on the device, the LED will turn blue. Press again to switch the unit to standby mode, the LED will
turn red.
INT/EXT:
Press this button to toggle between the built-in internal pattern generator or the external source device. The LED will
illuminate in blue when the external input is selected. To retrieve the external EDID information, an external source device must be
connected otherwise the device will only generate the test patterns to display on the TV/monitor.
PC/HD/3D:
Press this button to cycle through the test patterns (PC/HD or 3D timings). The OLED display will show the timing currently
selected.
AUDIO:
Press this button to select the audio sample rate from LPCM 2CH, LPCM 5.1CH and LPCM 7.1CH 48 kHz or LPCM 2CH,
LPCM 5.1CH and LPCM 7.1CH 96 kHz or LPCM 2CH and LPCM 5.1CH 192 kHz.
Note: Press and hold for 3 seconds to select Audio mute function.
M/
:
Press this button to enter the main menu and/or to con
fi
rm the selection.
PATTERN
(
▲
/
▼
):
Press these keys to select the patterns or when in OSD manual press these keys to select for option.
TIMING
(
▲
/
▼
):
Press these keys to select the required timings.
OLED Display:
Displays the relevant Information about attached devices.
4
