15
EDID FUNCTION
EDID SINGLE LEARNING MODE 2
LEARNING EDID #2
Passing EDID from Destination to Source
Multiple Learning mode #2 EDID setup
Key Press Sequence:
EDID > OFF >
DESTINATION #1 thru #8 > ENTER
The EDID for HDMI has been Learned from the
Destination port to the Source port.
1. Press
EDID
button
The LCM will show the current EDID status.
2. Press
OFF
button
The LCM will show the current EDID LEARN status.
3. Press
DESTINATION
button
Press
DESTINATION
(#1 thru #8)
The switcher will LEARN destination HDMI EDID and pass to the selected source.
The witcher will Enable or Disable HDMI EDID for the selected source.
4. Press
ENTER
button
Press
ENTER
to confirm changes.
The LCM will return to the default screen showing selected matrix routing status.
NOTE : When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM
and the EDID data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING
destination to source or Disable the LEARNING.
A
NEU
VIDEO
