OPERATION AND FUNCTIONS
FRONT PANEL
q
ON/OFF:
Power on/off switch.
w
SERVICE:
For factory use only.
e
IR :
Remote control receiver window.
r
POWER LED:
This red LED illuminates when the device is connected to the power supply.
t
IN1, 2, 3, 4 LED:
These red LED illuminates when the output has selected the corresponding input.
y
INPUT BUTTON:
Press this button to select the Input source.
u
MODE BUTTON:
Press this button to cycle thru the different view display modes.
i
RESO BUTTON:
Press this button to cycle thru the HDMI output resolutions.
BACK PANEL
q
INPUT:
This slot is where you connect the HDMI source output from DVD, PS3, Set-top Box and Note Book.
w
OUTPUT:
The HDMI is where you connect the HDTV or monitor with HDMI cable for input source display.The UTP port connect to CAT
Receiver by CAT5e/6 cable for signal extend.The Coax is where you connect to the amplifier with coaxial cable.
e
IR RX:
Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
r
IR TX:
Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the
equipment to be controlled.
t
RS-232:
Connect the RS-232 port to the PC or notebook by RS-232 Cable.
y
DC 12V:
Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
4
