2
INTRODUCTION & FEATURES
INTRODUCTION
The ANI-MODZ Modular Matrix is designed to allow the switching and distribution of up to (32) source devices to up to (32) connected
displays (model specific), either directly via a HDMI, DVI or CAT5e/6/7 outputs to compatible receivers, providing control options.
(Dependent on module configuration)
Providing unparalleled levels of flexibility, with an advanced modular design, these models can be setup in a wide variety of combinations
allowing users the ability to tailor the Matrix to their requirements by simply adding or removing the input or output modules as required.
The Modular Matrix is supplied with dual removable internal power supply units, (Except the ANI-MODZ8 which has only one PSU) which
allow for easy inspection and maintenance. Also included is a
DVI output for local monitoring
of the output, allowing installers to easily
monitor, test and configure the Inputs and Outputs on installation.
In addition, this matrix also features IP control allowing users to access and control the matrix remotely while also allowing additional
options for integration of a third-party control system. This product has a 3 year warranty.
ANI-MODz Modular Matrix Switcher CHASSIS’
MODELS
HEIGHT
MAXIMUM SLOT
POWER
SUPPLIES
RS-232
CONTROL
NETWORK
CONTROL
DVI
MONITOR
PORT
ANI-MODZ8
~4 in
1 input card slot & 1 output card slot
Single
ü
ü
ANI-MODZ16
~5.7 in
2 input card slots & 2 output card slots
Dual
ü
ü
ü
ANI-MODZ32
~9.2 in
4 input card slots & 4 output card slots
Dual
ü
ü
ü
SYSTEM REQUIREMENTS
• Up to (32) HDMI, DVI, CAT5e/6/7 or VGA source devices (dependent on module configuration) connected with appropriate cables
•
Up to (32) displays (TV or monitor) or AV receivers equipped with HDMI, DVI, CAT5e/6/7 connections (dependent on module
configuration) connected with appropriate cables
•
Industry standard CAT5e/6/7 cable (for CAT5e/6/7 inputs/outputs)
•
Compatible PoC HDBaseT
™
Transmitters/Receivers for CAT5e/6/7
•
Input/Output modules
•
An overall good attitude on life!
FEATURES
•
HDMI, HDCP 1.1 and DVI 1.0 compliant
•
Interchangeable input and output modules
•
Input and output module types can be mixed and added in multiples of (8) from 8x8 ((1) Input module, (1) Output module) up to 32x32
((4) Input modules, (4) Output modules) with HDMI, DVI, CAT5e/6/7 and VGA (Input only) connection types
• Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p@60Hz and 4K2K@24/25/30Hz
•
Supports pass-through of LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
•
Supports control of the matrix via front panel buttons, remote control, RS-232, Telnet and WebGUI controls
•
Supports (10) available preset settings
• Supports (3) EDID Modes: Standard, Dynamic and Manual
•
Dual removable power supply units (*Except the ANI-MODZ8)
•
DVI Monitor Port included on the 16x16 and 32x32 models
• Supports HDMI cable input lengths for up to ~50 ft/15M each way (1080p@60Hz 8bit resolution), ~33 ft/10M (1080p@60Hz 12bit
resolution) or ~17 ft/5M (4K2K@30Hz resolution)
• Supports CAT5e/6/7 cable output lengths for up to ~330 ft/100M (1080p@60Hz 8bit/12bit resolution) or ~230 ft/70M (4K2K@30Hz
resolution) dependent on board capabilities
•
HDBaseT
™
5Play
™
convergence supports UHD Video, HD Audio, PoC, Ethernet and IR/RS-232 Control
•
HDBaseT
™
4Play
™
convergence supports HD Video, HD Audio, PoC and IR/RS-232 Control
•
HDBaseT
™
3Play™ convergence supports HD Video, HD Audio and IR/RS-232 Control
A
NEU
VIDEO
