3
OPERATION CONTROLS & FUNCTIONS
Transmitter Front & BACK Panels
q
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of the device requires a
power supply when both the Transmitter and Receiver are using the PoC function.
w
LINK LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side. When the data
transmission occurs with errors, the LED will blink.
e
POWER LED:
This LED will illuminate when the devices are connected with a power supply.
r
CAT5e/6 OUT:
Connects to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
t
RS-232 IN:
Plug the 3.5mm D-Sub 9-pin female cable, included in the package, and connect to a PC or laptop for RS-232 command
transmission.
y
IR2 EXTENDER:
Connects to the supplied IR Extender cable for IR signal reception. Ensure that the remote being used is within the
direct line-of-sight of the IR Extender.
u
IR1 BLASTER:
Plug the IR Blaster, included in the package, for sending IR signal from the Receiver side.
i
HDMI IN:
Connects to the source equipment such as a DVD/Blu-ray player.
Receiver Front & BACK Panels
q
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of the device requires a
power supply when both the Transmitter and Receiver are using the PoC function.
w
LINK LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side. When the data
transmission occurs with errors, the LED will blink.
e
POWER LED:
This LED will illuminate when the devices are connected with a power supply.
r
CAT5e/6 IN:
Connects to the Transmitter unit with a single CAT5e/6/7 cable for transmission of all data signals.
t
RS-232 OUT:
Plug the 3.5mm D-Sub 9-pin male cable, included in the package, and connect to the device that is to be controlled with
RS-232 commands.
y
IR1 EXTENDER:
Connects to the supplied IR Extender cable for IR signal reception. Ensure that the remote being used is within the
direct line-of-sight of the IR Extender.
u
IR2 BLASTER:
Plug the IR Blaster, included in the package, for sending IR signal from the Receiver side.
i
HDMI OUT:
Connects to a HDMI equipped TV/monitor for display of the HDMI input source signal.
A
NEU
VIDEO
q w
e
r
t
y
u
i
q w
e
r
t
y
u
i
