3
Operation controls & Functions
Front Panel
q
IN LEDS:
The behavior of these LEDs depend on if Group Mode has been enabled or not.
A. GROUP MODE OFF
IN 1~2:
The illuminated LED indicates which source is currently selected.
GROUP: This LED will remain off.
B. GROUP MODE ON
IN 1~2:
These LEDs will illuminate to indicate that a live source has been detected on the associated input port. If no source is
detected the LED will remain off.
GROUP:
This LED will illuminate.
NOTE:
When the front panel is locked, all 3 LEDs will blink after any button press.
w
MENU:
Press to enter the OSD menu, or to back out from menu items.
NOTE:
Press and hold the
“MENU”
button for 3 seconds while connecting the power supply to reset all settings to the factory defaults.
e
− & IN 1:
Press to move down or adjust selections within OSD menus. When not in the OSD menu, press this button to switch to Input 1.
NOTE:
Pressing
“MENU”
and
“
−
”
together will force Input 1 to use the Internal
“FHD, 2CH”
EDID.
r
+ & IN 2:
Press to move up or adjust selections within OSD menus. When not in the OSD menu, press this button to switch to Input 2.
NOTE:
Pressing
“MENU”
and
“+”
together will force Input 2 to use the Internal
“FHD, 2CH”
EDID.
t
ENTER & GROUP:
Press to confirm a selection within the OSD or to go deeper into a menu item. When not in the OSD menu, press
this button to toggle Group Mode on and off.
NOTE:
Press and hold the
“MENU”
and
“ENTER”
buttons together for 3 seconds to lock or unlock the front panel.
y
IN 1:
Connect to HDMI source equipment such as a media player, game console or set-top box.
u
OUT A~D:
Connect to HDMI TVs, monitors or amplifiers for digital video and audio output.
NOTE:
When Group Mode is active, these outputs will display Input 1.
A
NEU
VIDEO
