1
2
Year
12/24h mode
Minutes
Day
Month
Hour
Press and hold
the ON/OFF button for 3 seconds
:
the word
“SET”
will appear on the screen.
Press the ON/OFF button again, briefly:
the year
starts blinking.
If the year isn’t correct,
change it by using the arrow
button
. Press the ON/OFF button to confirm.
Repeat the same operation to change the
month, day,
12/24h mode, hour and minutes.
When you’re done, press and hold
the ON/OFF button
for 3 seconds
to exit SET mode.
Slide the top cover up
and press the ON/OFF
button to
switch on the
meter.
Before starting,
make sure that the
displayed time and
date are correct.
The info displayed in the
figure opposite will appear
for 2 seconds.
If the time
and date are not correct,
change them by following
the instructions reported
hereafter.
2
CHECK THE TIME AND DATE
2.1
CHECK THAT THE TIME
AND DATE ARE CORRECT
2.2
CHANGE THE TIME AND
DATE
Summary of Contents for GlucoMen READY
Page 1: ...ready steady test do it yourself in a few steps ILLUSTRATED GUIDE TO GlucoMen READY...
Page 19: ...ready steady test OTHER FUNCTIONS GlucoMen READY features the following additional functions...
Page 26: ...personal notes...
Page 27: ...TO LEARN MORE ABOUT Glucomen ready or visit www xxxxxxxxxxx xx call Toll number xxx xxxxxxx...
